1 cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type pfch, 3-phase ac power harmonic filter capacitors type pfch 3-phase series capacitors are designed to flter undesirable harmonics at the ac output of large inverter system. each pfch capacitor is made with three self-healing metallized polypropylene windings, connected in delta, enclosed in a cylindrical aluminum case and flled with an environmentally friendly fuid. typical applications include wind turbine pfc controllers, solar inverter output flters, and power line conditioning. specifcations dimensions construction details case material extruded aluminum with steel or aluminum cover encapsulation environmentally safe dielectric fuid terminal material tin plated copper, brass or steel figure 1 figure 2 highlights - for 3-phase ac power harmonic fltering - delta connected - discharge resistors included - ul810 approved internal pressure interrupter 1.75 0.05 1.32 0.05 capacitance tolerance 0 to +10% rated frequency (f r ) 50 hz and 60 hz rated ac voltages (v r ) 240 vac, 480 vac, 600 vac operating temperature range C40 oc to +55 oc kvar range 0.5 kvar to 30.2 kvar maximum permissible voltage (vmax) 110% of rated rms voltage 120% of rated peak voltage (1.2 x 2x vrms) internal connection delta (?) maximum permissible current (imax) 135% of nominal rms current based on rated kvar and rated voltage - (up to 150% of l r including combined efects of harmonics, over voltages and capacitances, tolerance) life 60,000 h w/94% survival rate international standards meets ieee18, standard (ansi/ieee standard 18) fit (failure in time) 300 x 10 9 component h maximum short circuit current 10 ka (according to ul 810) mechanical and electrical safety pressure interrupter (pi) disengages all 3 phases in the event of capacitor end of life or overload discharge resistor time 60 seconds 50 v for 600 v or less; over 600 v 5 minutes rohs compliant dimensions max torque 88.5 in-lbs. max torque 88.5 in-lbs.
2 pfc h t 480 c 6 s 779 t type base type voltage case material kvar tolerance can height phases (vac) (%) (inches) pfc h = harmonic s = 2 round 24 = 240 c = aluminum case full kvar value s = 0/+10% expressed as 3 digit t = 3-phase t = 2? round 48 = 480 w/steel cover including decimals number of the case height v = 3 round 60 = 600 m12 stud @ 60 hz and from base to top of lip x = 3.5 round d = aluminum case (including seam) rounded w/aluminum cover and displayed without m12 stud decimal point cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ratings part numbering system type pfch, 3-phase ac power harmonic filter capacitors cde catalog number 60hz output kvar 50hz output kvar capacitance (f) r s (m) r th (c/w) max power (w) case 55c 65c 70c diameter (in) height (in) sa (in 2 ) style 240 vac pfchs24c0.5s572t 0.5 0.4 3 x 7.7 5.8 6.6 4.5 3.0 2.3 2.0 5.72 42 fig. 1 pfchs24c1s572t 1 0.8 3 x 15.4 4.2 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs24c1.5s572t 1.5 1.3 3 x 23.0 3.7 6.6 4.5 3.0 2.3 2.0 5.72 42 pfcht24c2s572t 2 1.7 3 x 30.7 3.4 5.1 5.9 3.9 2.9 2.5 5.72 55 pfcht24c2.5s572t 2.5 2.1 3 x 38.4 3.2 5.1 5.9 3.9 2.9 2.5 5.72 55 pfcht24c3s572t 3 2.5 3 x 46.1 3.1 5.1 5.9 3.9 2.9 2.5 5.72 55 pfcht24c4s778t 4 3.3 3 x 61.4 4.5 4.0 7.6 5.1 3.8 2.5 7.78 71 pfchv24d5s842t 5 4.2 3 x 76.8 1.8 3.0 10.0 6.7 5.0 3.0 8.42 94 fig. 2 pfchv24d6s842t 6 5.0 3 x 92.1 1.7 3.0 10.0 6.7 5.0 3.0 8.42 94 pfchv24d6.3s842t 6.3 5.3 3 x 96.7 1.6 3.0 10.0 6.7 5.0 3.0 8.42 94 pfchv24d7.5s108t 7.5 6.3 3 x 115.1 2.2 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchv24d8.3s108t 8.3 6.9 3 x 127.4 2.1 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchx24d10s108t 10 8.3 3 x 153.5 2.0 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx24d12.5s108t 12.5 10.4 3 x 191.9 1.8 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx24d15s137t 15 12.5 3 x 230.3 2.4 1.7 18.2 12.2 9.1 3.5 13.73 170 pfchx24d16.7s137t 16.7 13.9 3 x 256.4 2.3 1.7 18.2 12.2 9.1 3.5 13.73 170 pfchx24d17.5s137t 17.5 14.6 3 x 268.6 2.2 1.7 18.2 12.2 9.1 3.5 13.73 170 480 vac pfchs48c0.5s572t 0.5 0.4 3 x 1.9 11.3 6.6 4.5 3.0 2.3 2.0 5.72 42 fig. 1 pfchs48c1s572t 1 0.8 3 x 3.8 6.9 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs48c1.5s572t 1.5 1.3 3 x 5.8 5.4 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs48c2s572t 2 1.7 3 x 7.7 4.7 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs48c2.5s572t 2.5 2.1 3 x 9.6 4.3 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs48c3s572t 3 2.5 3 x 11.5 4.0 6.6 4.5 3.0 2.3 2.0 5.72 42 pfcht48c4s572t 4 3.3 3 x 15.4 3.6 5.1 5.9 3.9 2.9 2.5 5.72 55 pfcht48c5s572t 5 4.2 3 x 19.2 3.4 5.1 5.9 3.9 2.9 2.5 5.72 55 note: other ratings, sizes and performance specifcations are available. contact us.
3 cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type pfch, 3-phase ac power harmonic filter capacitors cde catalog number 60hz output kvar 50hz output kvar capacitance (f) r s (m) r th (c/w) max power (w) case 55c 65c 70c diameter (in) height (in) sa (in 2 ) style 480 vac pfcht48c6s778t 6 5.0 3 x 23.0 5.3 4.0 7.6 5.1 3.8 2.5 7.78 71 fig. 1 pfcht48c7.5s778t 7.5 6.3 3 x 28.8 4.9 4.0 7.6 5.1 3.8 2.5 7.78 71 pfcht48c8.3s778t 8.3 6.9 3 x 31.9 4.8 4.0 7.6 5.1 3.8 2.5 7.78 71 pfchv48d9s842t 9 7.5 3 x 34.5 2.2 3.0 10.0 6.7 5.0 3.0 8.42 94 fig. 2 pfchv48d10s842t 10 8.3 3 x 38.4 2.1 3.0 10.0 6.7 5.0 3.0 8.42 94 pfchv48d12.5s108t 12.5 10.4 3 x 48.0 2.8 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchv48d15s108t 15 12.5 3 x 57.6 2.6 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchx48d16.7s108t 16.7 13.9 3 x 64.1 2.4 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx48d18s108t 18 15.0 3 x 69.1 2.3 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx48d20s108t 20 16.7 3 x 76.8 2.2 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx48d25s137t 25 20.8 3 x 95.9 2.9 1.7 18.2 12.2 9.1 3.5 13.73 170 pfchx48d30s137t 30 25.0 3 x 115.1 2.7 1.7 18.2 12.2 9.1 3.5 13.73 170 600vac pfchs60c1s572t 1 0.8 3 x 2.5 7.4 6.6 4.5 3.0 2.3 2.0 5.72 42 fig. 1 pfchs60c1.5s572t 1.5 1.3 3 x 3.7 5.9 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs60c2s572t 2 1.7 3 x 4.9 5.1 6.6 4.5 3.0 2.3 2.0 5.72 42 pfchs60c2.5s572t 2.5 2.1 3 x 6.1 4.6 6.6 4.5 3.0 2.3 2.0 5.72 42 pfcht60c3s572t 3 2.5 3 x 7.4 4.2 5.1 5.9 3.9 2.9 2.5 5.72 55 pfcht60c4s572t 4 3.3 3 x 9.8 3.8 5.1 5.9 3.9 2.9 2.5 5.72 55 pfcht60c5s778t 5 4.2 3 x 12.3 5.9 4.0 7.6 5.1 3.8 2.5 7.78 71 pfcht60c6s778t 6 5.0 3 x 14.7 5.5 4.0 7.6 5.1 3.8 2.5 7.78 71 pfcht60c6.1s778t 6.1 5.1 3 x 15.0 5.5 4.0 7.6 5.1 3.8 2.5 7.78 71 pfcht60c6.3s778t 6.3 5.3 3 x 15.5 5.4 4.0 7.6 5.1 3.8 2.5 7.78 71 pfcht60c6.9s778t 6.9 5.8 3 x 16.9 5.3 4.0 7.6 5.1 3.8 2.5 7.78 71 pfchv60d7.5s842t 7.5 6.3 3 x 18.4 2.6 3.0 10.0 6.7 5.0 3.0 8.42 94 fig. 2 pfchv60d8.1s842t 8.1 6.8 3 x 19.9 2.5 3.0 10.0 6.7 5.0 3.0 8.42 94 pfchv60d8.3s842t 8.3 6.9 3 x 20.4 2.5 3.0 10.0 6.7 5.0 3.0 8.42 94 pfchv60d10s108t 10 8.3 3 x 24.6 3.6 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchv60d12.2s108t 12.2 10.2 3 x 30.0 3.1 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchv60d12.5s108t 12.5 10.4 3 x 30.7 3.1 2.4 12.4 8.3 6.2 3.0 10.78 116 pfchx60d13.8s108t 13.8 11.5 3 x 33.9 2.9 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx60d14.6s108t 14.6 12.2 3 x 35.9 2.8 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx60d15s108t 15 12.5 3 x 36.8 2.8 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx60d16.7s108t 16.7 13.9 3 x 41.0 2.6 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx60d17.5s108t 17.5 14.6 3 x 43.0 2.5 2.0 14.8 9.8 7.4 3.5 10.78 138 pfchx60d20s137t 20 16.7 3 x 49.1 3.6 1.7 18.2 12.2 9.1 3.5 13.73 170 pfchx60d22.5s137t 22.5 18.8 3 x 55.3 3.4 1.7 18.2 12.2 9.1 3.5 13.73 170 pfchx60d25s137t 25 20.8 3 x 61.4 3.2 1.7 18.2 12.2 9.1 3.5 13.73 170
4 performance notes r s : equivalent series resistance C ohmic resistances (ohm) dielectric dissipation factor: tan (polypropylene: 0.0002) t hs : hot spot temperature within the capacitor: t hs = t a + (p total 280 / sa) t a : ambient temperature r th : thermal resistance: c/ watt, indicates hot spot temperature rise due to power dissipation losses p max : maximum power dissipation: p max = (85 oc - t a ) / r th (watts) p total : total power generated by dielectric and ohmic losses: p = v peak 2 . c . tt . f . df (watts) given voltage p = i 2 . [r s + (x c . df)] (watts) given current where p total = p fund + p harm1 + p harm2 + .... + p harm design life: 60,000 hours 94% survival t hs : 85 c 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1000 10000 100000 1000000 applied voltage (va/vr) expected life time (h) expected lifetime vs. applied voltage and ambient temperature 85 oc 80 oc 70 oc 60 oc e xpected lifetime vs. applied voltage and hot spot temperature type pfch, 3-phase ac power harmonic filter capacitors
5 type pfch, 3-phase ac power harmonic filter capacitors notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the cus - tomer is responsible for checking, confrming and verifying the extent to which the information contained in this datasheet or other publication is applicable to an order at the time the order is placed. all informa - tion given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain appli - cations are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such ap - plications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this in - formation or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier prod - ucts is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obliga - tion or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
|
